{"product_id":"zone-offroad-18-24-ford-expedition-2in-lift-kit","title":"18-26 Ford Expedition \/ 18-24 Lincoln Navigator Zone Offroad ZONF1224 2in Lift Kit","description":"\u003ch2\u003e\u003cstrong\u003eZone Offroad 2-Inch Lift Kit for Ford Expedition | Part Number: ZONF1224\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Zone Offroad ZONF1224 2-Inch Lift Kit gives the 2018-2026 Ford Expedition \u0026amp; 2018-2024 Licoln Navigator a more aggressive stance with increased front ride height and a rear lift designed to help maintain a balanced appearance. Featuring a combination of top spacer and preload spacer at the front, this suspension lift is designed to provide the maximum amount of lift safely while helping prevent excessive extension of the factory upper ball joint and premature wear. A 1.25-inch rear top spacer complements the 2-inch front lift, while the included sensor brackets reposition the CCD sensors to accommodate the lift at the front and rear. For Expedition and Lincoln Navigator owners looking to enhance their SUV's appearance and accommodate select larger tire and wheel combinations, this Zone Offroad lift kit offers a practical suspension upgrade. Proper vehicle fitment must be verified before purchase, particularly for models equipped with ride height sensors on the front or rear control arms.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2-inch front suspension lift designed to give the Ford Expedition and Lincoln Navigator a more aggressive appearance.\u003c\/li\u003e\n\u003cli\u003e1.25-inch rear top spacer helps lift and level the rear in combination with the front lift.\u003c\/li\u003e\n\u003cli\u003eCombination front top spacer and preload spacer design helps prevent excessive extension of the factory upper ball joint.\u003c\/li\u003e\n\u003cli\u003eDesigned to provide the maximum amount of lift safely while helping reduce the risk of premature factory upper ball joint wear.\u003c\/li\u003e\n\u003cli\u003eIncludes the necessary sensor brackets to reposition CCD sensors for the front and rear suspension lift.\u003c\/li\u003e\n\u003cli\u003eUses strut spacers for both the front and rear lift methods.\u003c\/li\u003e\n\u003cli\u003eCompatible tire and wheel combinations are specified for select 20-inch wheel setups, subject to vehicle clearance and potential trimming.\u003c\/li\u003e\n\u003cli\u003eShocks are not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eBenefits\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced styling: Adds a more aggressive, lifted stance to the Ford Expedition and Lincoln Navigator.\u003c\/li\u003e\n\u003cli\u003eBalanced appearance: The 1.25-inch rear spacer complements the 2-inch front lift to help maintain a level look.\u003c\/li\u003e\n\u003cli\u003eFactory component consideration: The combination spacer design is intended to help limit excessive extension of the factory upper ball joint.\u003c\/li\u003e\n\u003cli\u003eSensor accommodation: Included brackets allow the CCD sensors to be repositioned for the front and rear lift installation.\u003c\/li\u003e\n\u003cli\u003eLarger tire options: Supports the listed tire and wheel combinations, subject to clearance requirements and possible trimming.\u003c\/li\u003e\n\u003cli\u003eWarranty information: Warranty coverage and terms are not specified in the supplied product information and should be confirmed with the seller before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Specifications\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: Zone Offroad\u003c\/li\u003e\n\u003cli\u003ePart Number: ZONF1224\u003c\/li\u003e\n\u003cli\u003eProduct Type: Suspension Lift Kit\u003c\/li\u003e\n\u003cli\u003eFront Lift Height: 2 inches\u003c\/li\u003e\n\u003cli\u003eRear Lift Height: 1.25 inches\u003c\/li\u003e\n\u003cli\u003eFront Lift Method: Strut spacer with combination top spacer and preload spacer\u003c\/li\u003e\n\u003cli\u003eRear Lift Method: Strut spacer\u003c\/li\u003e\n\u003cli\u003eShocks Included: No\u003c\/li\u003e\n\u003cli\u003eCCD Sensor Brackets: Included\u003c\/li\u003e\n\u003cli\u003eColor: Not specified in the supplied product information\u003c\/li\u003e\n\u003cli\u003eMaterial: Not specified in the supplied product information\u003c\/li\u003e\n\u003cli\u003eInstallation Time: 3-4 hours\u003c\/li\u003e\n\u003cli\u003eInstallation Difficulty: Moderate\u003c\/li\u003e\n\u003cli\u003eRecommended Wheel Size: 20 x 9 inches\u003c\/li\u003e\n\u003cli\u003eRecommended Tire and Wheel Combination 1: 285\/60 tires with 20 x 9-inch wheels and 5-inch backspacing\u003c\/li\u003e\n\u003cli\u003eRecommended Tire and Wheel Combination 2: 295\/55 tires with 20 x 9-inch wheels and 5.75-inch backspacing\u003c\/li\u003e\n\u003cli\u003eRecommended Tire and Wheel Combination 3: 285\/55 tires with 20 x 9-inch wheels and 5-inch backspacing\u003c\/li\u003e\n\u003cli\u003eTrimming Requirements: Trimming may be required for the recommended tire and wheel combinations.\u003c\/li\u003e\n\u003cli\u003eRunning Board Clearance: Running boards must be removed to fit 295\/55R20 tires on 20 x 9-inch wheels with 5.75-inch backspacing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eBenefits of the Recommended Tire and Wheel Combinations\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Zone Offroad ZONF1224 lift kit supports several specified tire and wheel combinations for owners seeking a more substantial SUV stance. Actual fitment depends on vehicle configuration and available clearance, and trimming may be necessary. For the 295\/55R20 tire combination on 20 x 9-inch wheels with 5.75-inch backspacing, the running boards must be removed.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eInstall Difficulty Level\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eInstallation Difficulty: Moderate. The estimated installation time is 3-4 hours, with 3 hours representing the shortest stated estimate. The spacer-based design provides a straightforward approach to raising the vehicle compared with replacing the complete suspension system. Installation should be performed by a qualified installer with the appropriate tools and procedures. The front coil spring remains under extreme pressure during strut disassembly, making the correct spring compressor essential.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Safety Warning:\u003c\/strong\u003e Always use a high-quality spring compressor and carefully read and follow the manufacturer's instructions. Improper coil spring removal or installation can result in serious injury or death.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2018 Ford Expedition — All submodels, 4WD, all fuel types listed.\u003c\/li\u003e\n\u003cli\u003e2019 Ford Expedition — All submodels, 4WD, all fuel types listed.\u003c\/li\u003e\n\u003cli\u003e2020 Ford Expedition — All submodels, 4WD, all fuel types listed.\u003c\/li\u003e\n\u003cli\u003e2021 Ford Expedition — All submodels, 4WD, all fuel types listed.\u003c\/li\u003e\n\u003cli\u003e2022 Ford Expedition — All submodels, 4WD, all fuel types listed.\u003c\/li\u003e\n\u003cli\u003e2023 Ford Expedition — All submodels, 4WD, all fuel types listed.\u003c\/li\u003e\n\u003cli\u003e2024 Ford Expedition — King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XLT, Platinum, SSV, Timberline, XL STX, and XLT. Most listed configurations specify 4WD; Timberline is listed with all drive types.\u003c\/li\u003e\n\u003cli\u003e2025 Ford Expedition — All submodels, 4WD, all fuel types listed, with fitment data indicating 0-2 inches of front and rear lift.\u003c\/li\u003e\n\u003cli\u003e2026 Ford Expedition — All submodels, 4WD, all fuel types listed, with fitment data indicating 0-2 inches of front and rear lift.\u003c\/li\u003e\n\u003cli\u003e2018-2024 Lincoln Navigator— All submodels, 4WD, all fuel types\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Fitment:\u003c\/strong\u003e Specific engine sizes and engine codes are not identified in the supplied fitment information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Fitment Exclusion:\u003c\/strong\u003e This kit will not fit 2025 and newer models equipped with ride height sensors on the front and\/or rear control arms. Vehicle configuration and sensor location must be checked carefully before ordering.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eImportant Installation and Fitment Notes\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRunning boards must be removed when installing 295\/55R20 tires on 20 x 9-inch wheels with 5.75-inch backspacing.\u003c\/li\u003e\n\u003cli\u003eTrimming may be required for the recommended tire and wheel combinations.\u003c\/li\u003e\n\u003cli\u003eThe coil spring is under extreme pressure during strut disassembly.\u003c\/li\u003e\n\u003cli\u003eUse only a high-quality spring compressor and follow the compressor manufacturer's instructions carefully.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe kit is not compatible with 2025 and newer models equipped with ride height sensors on the front and\/or rear control arms.\u003c\/li\u003e\n\u003cli\u003eShocks are not included with this lift kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor questions about the Zone Offroad ZONF1224 2-Inch Lift Kit, vehicle compatibility, installation requirements, warranty coverage, or to report product description inaccuracies, contact the MPT Performance experts at (407) 636-7077 or by email.\u003c\/p\u003e","brand":"Zone Offroad","offers":[{"title":"Default Title","offer_id":67624238481586,"sku":"ZORZONF1224","price":349.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/4341\/8034\/files\/zon_F1224.webp?v=1792150014","url":"https:\/\/morepowertuning.com\/products\/zone-offroad-18-24-ford-expedition-2in-lift-kit","provider":"More Power Tuning","version":"1.0","type":"link"}