On-Device Datalogging for 2011+ Ford Ecoboost

Step 1. Software Download and Files

Install LiveLink Gen-II - Click Here to Download
Install Device Updater - Click Here to Download
Download On-Device Configuration File below
• 21-23 F150 EB 3.5 - Download Here
• 17-20 F150 EB 3.5 - Download Here
• 17-20 Raptor EB 3.5 - Download Here
• 15-16 F150 EB 3.5 - Download Here
• 13-14 F150 EB 3.5 - Download Here
• 2012 F150 EB 3.5 - Download Here
• 2011 F150 EB 3.5 - Download Here
• 19-20 F150 EB 2.7 - Download Here
• 2018 F150 EB 2.7 - Download Here
• 15-17 F150 EB 2.7 - Download Here


More Info - Requirements FAQ 

  • SCT Tuner - X4, Livewire TS, BDX or GTX
  • USB Cable - Micro-USB is standard
  • Windows Computer - 7, 8, 8.1 or 10 

CONFIG FILE DOWNLOAD The on-device config file listed above is downloaded as a ".zip" file(folder). You have to "unzip" this file before transferring it to the tuner.

  1. Download the config file.
  2. Open the zipped config, then drag the .dlx file from the zipped folder to a new location.
  3. Use Device Updater's "Transfer File to Device" button, then select browse and choose the .dlx file from where you saved it.

 

Step 2. At the Vehicle

Once in the vehicle, plug the tuner into the OBDII port.
Enter the datalog menu with the vehicle running
Select the MPT config file. If you don't see it, it might be listed as NA.
The gauges will display and you can begin driving.

More Info - Detailed Steps

At the Vehicle:

  • Connect tuner to OBDII
  • Select Gauges/Datalog
  • Follow Key-On prompt
  • Select MPT config. Currently it is displayed as NA due to a bug in Livelink. Then Continue
  • Tuner will display gauges

Step 3. Record the Log

Press the center button and select Start Datalog
You'll see a circle in the middle of the screen with REC displayed
Perform the log as instructed, normally 3rd gear WOT for 6 speed or 5th gear WOT for 10 speed or Quarter Mile
When complete, Press center button and select Stop Datalog
More Info - Types of Logs - FAQs

Types of Datalogs

    • If working with a calibrator, you will likely have specifc instructions on what log to record.
  • Issue Capture - If you have something specific you want reviewed, that is what to record.
  • 3rd Gear WOT (for 6 speed)- Use M driving mode to lock in 3rd gear, Go wide open throttle from 2,000-6,000 RPMS.
  • 5th Gear WOT (for 10 speed) - Use M driving mode to lock in 5th gear, Go wide open throttle from 2,000-6,000 RPMS.
  • Quarter-Mile - From a stop, floor it and capture Wide Open Throttle shifting.
  • Neutral Step Test - In Park/Neutral: Idle 2 min, hold pedal at 500 rpm increments from 1,000-4,000 RPM for 10 seconds each.

Step 4. Email the Log

At the computer, Plug the tuner in and open Livelink
Select Import Data from the top menu in Livelink to save the datalog
Reply to latest email.
Attach Log to email.
Include info on what tune was loaded when logging.
Avoid sending a blank email with log attached. More Info - Related How-To's

Common Mistakes to Avoid:

Sending email with no info and saved as datalog1 will result in an email back asking for more info and what tune was loaded.

Prevent Delays by saving the file with our preferred naming system and including info in the email.

If you have any questions or need help, call us with vehicle, tuner and everything present.

Please Note: Closed course such as drag strip recommended for recording high speed data logs. It is assumed by MPT that all vehicles being programmed are in good working condition and have been reviewed by the customer to ensure that they are capable of handling additional power and performance. It is the customer's responsibility to ensure this is true.

MPT will not be held responsible for improper, unsafe, reckless, or careless driving of vehicles after installing any of our products. We do not encourage the breaking of any State or Federal Laws.