2017+ Auto-Wake and Auto-Sleep Quick Setup



Step 1 - with nGauge powered on, select "Diagnostics" from the main menu. Next, select "Settings," then "Sleep/Wake." 

Step 2 - Set Sleep Mode to "VEHICLE DATA". 
 
Step 3 0 - Set Wake Mode to "ALTERNATOR ON" (might say "VOLTAGE LEVEL"). This will wake the nGauge if the voltage goes over a threshold, or the screen is touched.
Step 4 - Set idle time to 10 seconds 

That's it!


All other default settings in the Sleep/Wake menu should work fine, but if you find you need to adjust them, you may want to copy the current settings for your notes so you can go back to default.

Return to nGauge How To Guides and Tech Support Main Menu