04-08 Ford F-150 aFe 51-80512 Magnum FORCE Stage-2 Si Cold Air Intake System w/ Pro DRY S Filter

Boost performance with the aFe Magnum FORCE Stage-2 Si Cold Air Intake System. Engineered for the 5.4L V8, it delivers dyno-proven gains of up to 23 HP and 25 lb-ft of torque while increasing airflow by 69%. Its sealed design, reusable Pro DRY S filter, and direct bolt-on installation make it an exceptional performance upgrade.

Top Features

  • Up to 23 horsepower and 25 lb-ft torque gains
  • Up to 69% more airflow than the factory intake
  • Large 5-1/2-inch washable and reusable Pro DRY S air filter
  • Fully sealed rotomolded air box reduces heat soak
  • Black powder-coated aluminum cover for easy filter access
  • Heat-insulating molded intake tube improves airflow efficiency
  • Auxiliary air inlet scoop enhances throttle response
  • Direct bolt-on installation using factory mounting locations
  • No ECU tuning required
  • CARB Approved under EO D-550-15 for applicable vehicles

Vehicle Fitment

  • 2004-2008 Ford F-150 5.4L V8 Gas
  • 2006-2008 Lincoln Mark LT 5.4L V8 Gas
Vendor: aFe
SKU: AFE51-80512
Availability: (Special Order Item)
$ 376.00 USD
On-Sale $ 376.00 USD
Normally $ 376.00 USD
Save $ 0.00
Better hurry, only 0 left in stock.

Secure Shopping with Hassle Free Returns

Free Shipping on orders over $149

10 customers are viewing this product
CARB EO#: D-550-15
This product is CARB-APPROVED and is allowed to ship to California.
  • More Power Tuning
  • More Power Tuning

Proposition65 Warning: Cancer and Reproductive Harm

aFe Magnum FORCE Stage-2 Si Cold Air Intake System w/ Pro DRY S Filter - Part Number 51-80512

The aFe Magnum FORCE Stage-2 Si Cold Air Intake System (Part Number 51-80512) is engineered to deliver substantial performance improvements for 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT models equipped with the 5.4L V8 engine. Designed using extensive dyno testing, this premium sealed cold air intake system increases airflow by up to 69% over the factory intake, producing dyno-proven gains of up to 23 horsepower and 25 lb-ft of torque. The fully enclosed intake design helps reduce heat soak by drawing in cooler, denser air while maintaining excellent engine protection. Featuring a washable and reusable Pro DRY S synthetic air filter, a heat-insulating molded intake tube, and a durable rotomolded housing with a black powder-coated aluminum cover, this system offers an ideal combination of performance, durability, and low maintenance. Installation utilizes factory mounting locations with no ECU tuning required, making it an excellent upgrade for drivers seeking improved throttle response, stronger acceleration, and dependable long-term performance.

Key Features

  • Dyno-proven gains of up to 23 horsepower and 25 lb-ft of torque.
  • Flows up to 69% more air than the factory intake system.
  • Large 5-1/2-inch conical Pro DRY S washable and reusable synthetic air filter.
  • Three-layer progressive, non-oiled filter media provides excellent filtration with simple maintenance.
  • Fully sealed rotomolded plastic air box minimizes engine heat while maximizing cool air intake.
  • Black powder-coated aluminum cover allows convenient filter access during maintenance.
  • Auxiliary air inlet scoop increases incoming air volume for improved airflow and throttle response.
  • Heat-insulating molded intake tube is dyno tuned to maximize airflow velocity and engine efficiency.
  • Retains factory emissions connections and mounting locations for a straightforward installation.
  • No ECU tuning required after installation.
  • Includes heat shield, mounting hardware, and installation components.

Benefits

  • Improves horsepower, torque, and overall engine performance throughout the RPM range.
  • Enhances throttle response for quicker acceleration and a more responsive driving experience.
  • Draws cooler, denser air to help improve combustion efficiency.
  • Washable and reusable Pro DRY S filter reduces long-term replacement filter costs.
  • Sealed intake design helps protect the filter from hot underhood air.
  • Engineered for reliable daily driving and towing applications.
  • Installs using factory mounting locations without permanent modifications.
  • Backed by aFe POWER's Limited Lifetime Warranty for the intake system, with warranty coverage for manufacturing defects. Refer to the manufacturer's warranty policy for complete coverage details.

Product Specifications

  • Manufacturer: aFe POWER
  • Product Line: Magnum FORCE Stage-2 Si Cold Air Intake System
  • Part Number: 51-80512
  • Replacement Air Filter: 21-90032
  • Optional Pre-Filter: 28-10133
  • Air Filter Size: 5-1/2-inch conical with inverted top
  • Filter Media: Non-woven synthetic (Pro DRY S)
  • Filter Color: Gray
  • Filter Type: Washable and reusable, non-oiled
  • Air Box Style: Fully enclosed sealed housing
  • Housing Material: Rotomolded plastic
  • Cover Material: Black powder-coated aluminum
  • Intake Tube Material: Heat-insulating molded plastic
  • Heat Shield: Integrated sealed housing
  • Mounting Hardware: Included
  • Horsepower Gain: Up to 23 HP
  • Torque Gain: Up to 25 lb-ft
  • Airflow Increase: Up to 69% over stock
  • ECU Tuning Required: No

Install Difficulty Level

Easy. This intake system is designed as a direct bolt-on upgrade using factory mounting points and existing emissions connections. No cutting, drilling, or ECU tuning is required, making installation straightforward for most DIY enthusiasts using basic hand tools. Under normal conditions, installation can be completed in as little as 30 minutes.

Vehicle Fitment

  • 2004-2008 Ford F-150 5.4L V8 Gas
  • 2006-2008 Lincoln Mark LT 5.4L V8 Gas

CARB Approved

This aFe POWER Magnum FORCE Stage-2 Si Cold Air Intake System is CARB approved for applicable vehicles and is covered under CARB Executive Order (EO) D-550-15. This EO allows legal use on emissions-controlled vehicles for approved applications in all 50 states. Always verify the specific vehicle application before purchase.

If there are any questions about this product or to report product description inaccuracies, contact the MPT Performance experts at (407) 636-7077 or by email.

Shipping Policy

MPT is proud to offer free shipping on most orders over $149.

  • Free shipping applies only to the contiguous United States. Shipping and handling charges will apply to orders outside the contiguous US, and the buyer is responsible for any duty fees or taxes their home country may charge to import goods.
  • With free shipping, we will choose the best shipping method for your order. We use all major carriers, including USPS, FedEx, UPS, and DHL.

Turnaround Times:

  • MPT Tunes have a standard turnaround time of 2-3 business days, beginning once we receive your MPT Tune Form.
  • We do not process orders on weekends or observed holidays, which do not count as business days.
  • Physical items that are in stock at MPT and ordered by 4PM EST will be shipped the same day. Orders placed after 4PM EST will be processed on the following business day.

Special Considerations:

  • Items not stocked at our location will follow the same processing times but may experience lead-time delays and could incur additional charges. Shipping methods may vary for these items based on what was paid and the requested delivery speed. If you need an item by a specific deadline, please contact an MPT Expert.
  • SCT Tuner Orders with the Prioritized Order option must have their tune forms submitted by 3PM EST to be completed the same day. Forms submitted after this time will be processed the next business day.
  • Orders will ship to the billing address listed on your order. If paying by credit or debit card, we can only ship to the billing address. Contact an MPT Expert for assistance if you need a different shipping address.

MPT Performance Returns and Refund Policy

A Return Authorization Number is required for all returns. Please contact an MPT Expert to obtain an RA # before sending anything back to us for any reason.

MPT tuning charges and license fees are Non-Refundable. The sale is final when MPT has sent the tune file over email. This includes both new tune purchases and tune updates.

Products other than MPT tunes, digital products, and MPT decals may be returned within 30 days for any reason, provided that the product has not been installed and is in brand new, unused condition with the original packaging. Once a product has been installed it is non-refundable. We reserve the right to deny the return, should the product be received and it display signs of installation or unmentioned damage.

For vehicle programmers/tuners, the vehicle must be returned to stock if a program was installed. If a tuning device is returned and has not been returned to stock, a refund will not be issued, and your tuner will not be sent back without a shipping and handling fee.

The customer is responsible for all shipping charges incurred during the return process.

Amount Refunded:
•Returns post marked before 30 days from the date the item was received will be refunded the purchase price, minus a 25% restocking fee and the cost of shipping.
After 30 days, all sales are Final.
•Shipping charges along with any package insurance are non-refundable. If your purchase was shipped with our Free Shipping option, the cost of the shipping will be subtracted from the total refund amount.

HP Tuners Credits are assigned to the HP Tuners product with the submitted serial number and cannot be transferred. Once you load a tune to your vehicle with the RTD, these credits are Non-Refundable.

Digital products and files that have no ability to be taken back physically, such as an SCT Tuner Unlock, are Non-Refundable.

nGauge Tune License Fee is included in your initial purchase of MPT tunes for the nGauge. This fee is factored into the price of the tunes and becomes Non-Refundable when the stock file has been emailed to MPT.

MPT Decals are Non-Refundable, once they have been received by the customer.

Related Products

Recently Viewed Products