13-14 Ford Mustang V8 5.0L AT/MT Borla 140516 RWD Single Split Rear Exit ATAK Catback Exhaust

Borla 140516 RWD Single Split Rear Exit ATAK Catback Exhaust

If you are looking for a way to upgrade your 2013-2014 Ford Mustang GT or Boss 302 with a powerful and stylish exhaust system, you might want to consider the Borla ATAK Catback Exhaust. This product is designed to unleash the hidden horsepower of your engine, improve the exhaust velocity, and deliver an iconic Borla sound of power. In this product description, we will highlight some of the key features and benefits of this exhaust system, as well as provide you with some installation tips and warranty information.

Key Features

• The Borla ATAK Catback Exhaust is made from premium T-304 stainless steel, which is superior to T-400 series knockoffs (such as 409), and can withstand high temperatures and pressures.
• The exhaust system features a single split rear exit design, which provides a smooth and balanced sound throughout the rev range. The tips are made from bright chrome on T-304 stainless steel, which enhances the appearance and durability of the system.
• The exhaust system is compatible with active exhaust systems (4 tips), which can be heard at low RPMs. The system also has a mandrel-bent design, which ensures maximum flow and power.
• The exhaust system comes with all the necessary hardware and clamps for easy installation. It also has a lifetime warranty from Borla Performance Industries.

Benefits

• By installing the Borla ATAK Catback Exhaust on your Mustang GT or Boss 302, you can expect to see an increase in horsepower, torque, fuel economy, and throttle response. You can also enjoy a more aggressive and sporty sound that will turn heads on the road.
• The Borla ATAK Catback Exhaust is designed to fit perfectly with your vehicle’s specifications. It has a diameter of 2.75 inches at the tip and 2.5 inches at the muffler exit. It weighs about 16 pounds in total.
• The Borla ATAK Catback Exhaust is backed by a million-mile warranty from Borla Performance Industries. This means that if any part fails due to defects in material or workmanship within one million miles of purchase, Borla will replace it for free.

Install Difficulty Level

The installation of the Borla ATAK Catback Exhaust is not very difficult if you have some basic tools and skills. However, it is recommended that you have an exhaust shop or professional after market parts installer perform the installation for optimal results. Alternatively, if you decide to install it yourself, you should follow these steps:

1. Make sure your vehicle is parked on a level surface away from any heat sources or flammable materials.
2. Remove any accessories such as wheels, mirrors, lights, etc.
3. Disconnect the negative battery cable from your vehicle’s battery terminal.
4. Remove any existing catalytic converters or mufflers from your vehicle’s tailpipe using a pry bar or wrench.
5. Remove any bolts or clamps that secure your stock exhaust pipes to your vehicle’s frame using a ratchet and extension.
6. Carefully lift out your stock exhaust pipes from under your vehicle using a pry bar or wrench.
7. Install new clamps on both ends of each pipe using a ratchet and extension.
8. Install new bolts on both ends of each pipe using a ratchet and extension.
9. Install new over-axle pipes on both sides of your vehicle using new bolts and clamps provided by Borla Performance Industries.
10. Install new X-pipe assemblies on both sides of your vehicle using new bolts provided by Borla Performance Industries.
11. Install new mufflers on both sides of your vehicle using new bolts provided by Borla Performance Industries.
12. Connect all hoses and wires according to their instructions provided by Borla Performance Industries.
13. Reconnect the negative battery cable to your vehicle’s battery terminal.
14. Reinstall any accessories that were removed earlier such as wheels, mirrors, lights, etc.

The installation time for this product is estimated to be about two hours. You should use all under car safety precautions including eye protection when working under your vehicle.

Vehicle Fitment

The Borla ATAK Catback Exhaust is designed for vehicles that have an active exhaust system (4 tips) with an engine displacement of 5 liters (V8) with either automatic or manual transmission. The product number for this product is 140516. 

If you have any questions about this product or to report product description inaccuracies, contact the MPT Performance experts at (407) 636-7077 or by email.