21-23 Ford F-150 / 21-23 Raptor / 22-23 Bronco Raptor / 22-23 Expedition Power Stop AR85208 Autospecialty Brake Rotor - Rear

Power Stop AR85208 Autospecialty Brake Rotor - Rear

If you are looking for a reliable and affordable brake rotor for your Ford vehicle, you might want to consider the Power Stop AR85208 Autospecialty Brake Rotor. This rotor is designed to provide superior braking performance and durability for your daily driving needs. It is made from high-quality cast iron and coated with a black e-coating to prevent rust and corrosion. The rotor also features a non-directional surface finish that reduces noise and enhances pad life.

Key Features:

• High-quality cast iron construction for strength and durability
• Black e-coating for corrosion resistance and long-lasting protection
• Non-directional surface finish for reduced noise and improved pad life
• Precision machined and balanced for smooth and vibration-free braking
• Compatible with stock calipers and brake pads

Benefits:

• Improved braking performance and safety for your vehicle
• Enhanced appearance and style for your wheels
• Easy and hassle-free installation with no modifications required
• Backed by a 3-year/36,000-mile warranty against defects in materials and workmanship

Product Specs:

• Size: 13.78 inches (350 mm) in diameter and 0.87 inches (22 mm) in thickness
• Color: Black
• Material: Cast iron
• Position: Rear
• Quantity: Sold individually

Install Difficulty Level:

• Installing this brake rotor is a simple and straightforward process that can be done in less than an hour. You will need some basic tools such as a jack, jack stands, lug wrench, socket set, torque wrench, and a C-clamp or caliper compressor. You can follow the steps below to install the rotor:

  1. Loosen the lug nuts on the rear wheel and raise the vehicle with a jack. Support the vehicle with jack stands and remove the wheel.
  2. Remove the caliper mounting bolts and slide the caliper off the rotor. Use a C-clamp or caliper compressor to compress the caliper pistons and secure the caliper to the suspension with a wire or a bungee cord. Do not let the caliper hang by the brake hose.
  3. Remove the old rotor from the wheel hub and clean the hub surface with a wire brush or sandpaper. Apply some anti-seize compound to the hub to prevent rust and corrosion.
  4. Clean the new rotor with brake cleaner and a rag to remove any oil or protective coating. Align the rotor with the wheel studs and slide it onto the hub.
  5. Reinstall the caliper over the rotor and tighten the mounting bolts to the specified torque. Make sure the caliper slides freely on the guide pins and the brake pads are properly seated on the rotor.
  6. Reinstall the wheel and lower the vehicle. Repeat the same procedure for the other side.
  7. Pump the brake pedal several times to restore the hydraulic pressure and check the brake fluid level. Test drive the vehicle and perform several stops to bed in the new rotor and pads.

Vehicle Fitment:

• This brake rotor fits the following Ford vehicles:

  • 2021-2023 Ford F-150 with 3.5L EcoBoost, 5.0L V8, or 3.0L Power Stroke engines
  • 2021-2023 Ford F-150 Raptor with 3.5L EcoBoost engine
  • 2022-2023 Ford Bronco Raptor with 3.5L EcoBoost engine
  • 2022-2023 Ford Expedition with 3.5L EcoBoost or 5.0L V8 engines

If you have any questions about this product, please contact the MPT Performance experts at (407) 636-7077 or by email.