Protect your F‑150’s transmission and catalytic converter with this lightweight, deep-stamped aluminum skid plate. Engineered for serious off-roading, it offers strength without rust or weight, easy bolt-on installation, and rugged durability in all conditions.
¼-inch (6 mm) marine-grade aluminum
No-drill, bolt-on installation
Corrosion-resistant & lightweight (26 lbs)
Reinforced with stamped ribs for strength
Oil change access ports included
Matte metallic silver finish
Fits: 2015–2025 Ford F‑150
Compatible with: EcoBoost (2.7L, 3.5L) and 5.0L V8
Not compatible with: PowerBoost models or lift kits with crossmember drop brackets
Physical products may be returned within 30 days for any reason, provided that the product has not been installed and is in brand new, unused condition with the original packaging. Once a product has been installed, it is non-refundable.
Digital Products, such as MPT Tunes and HP Tuners Credits, are not covered by this.
Please see our Refund Policy or contact an MPT Expert for more information.
MPT is proud to offer free shipping on most orders over $149.
Free Shipping applies only to the contiguous United States. Shipping and handling charges will apply to all orders outside the contiguous US, with the buyer being responsible for any duty fees or taxes their home country may charge to import goods.
With Free Shipping, we will choose the best shipping method for the order. We use all major carriers, including USPS, FedEx, UPS, and DHL.
Items not stocked at our location may incur additional lead-time or charges.
Please our Shipping Policy for more information.
Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986) is a California law that applies to all companies selling products in California. Proposition 65 requires warnings if a product contains any listed chemical present above very low levels that are known to cause cancer, birth defects or other reproductive harm. Proposition 65’s warning standards are among the most stringent in the world. Proposition 65 is not a product safety law, but rather a “right-to-know” law. Businesses are required to provide warnings to comply with Proposition 65. These warnings are required to be in place for all products offered for sale in California.
There are over 800 chemicals on the Proposition 65 list, which is administered by California's Office of Environmental Health Hazard Assessment (OEHHA), a part of the California Environmental Protection Agency. The list includes naturally occurring and man-made chemicals. Proposition 65 warnings can be seen for a wide variety of everyday consumer products, including Automotive Performance products, and warnings can be seen posted throughout California in a variety of establishments such as hotels, restaurants, automobile dealerships/repair shops, and retail stores just to name a few.
To comply with the requirements of Proposition 65, this warning is present on all products sold by MPT.
More detailed information can be found by going to:
https://www.p65warnings.ca.gov/
This RIVAL skid plate is engineered to protect the underbody of the Ford F‑150 — specifically the transmission and catalytic converter — from harsh terrain, rocks, logs, and road debris. Crafted from deep‑stamped, laser-cut aluminum alloy, it balances strength with weight savings, making it ideal for off-road performance without compromising durability. It bolts directly to factory mounting points with no drilling or cutting, preserving the vehicle’s integrity and making installation straightforward. With its innate corrosion resistance, the aluminum construction ensures longevity — even when scratched or gouged — giving peace of mind during rugged adventures or routine driving.
Deep-stamped ¼‑inch (6 mm) marine-grade aluminum alloy construction
Laser-cut precision design with reinforcing ribs for rigidity
No-drill installation using factory mounting points
Integrated drainage and vent slots to prevent water or debris buildup
Access port(s) to facilitate oil changes without removal
Matte metallic silver / brushed aluminum finish
Concealed fasteners to minimize catching or snagging hazard
Delivers robust protection to transmission and catalytic converter when off-roading or encountering rough terrain
Up to ~30% lighter than comparable steel skid plates, preserving vehicle performance
Naturally corrosion-resistant — will not rust even if the surface is scratched
Simple bolt-on install means less labor time and preserves vehicle structural integrity
Access port(s) simplify maintenance (oil changes) without removing the plate
Backed by a 1‑year limited warranty against defects in material, craftsmanship, and finish (under normal use)
Lifetime of peace of mind for overlanders, trail drivers, and daily drivers alike
Part Number: 2333.1857.2.6
Application: Transmission & Catalytic Converter skid plate
Material: ¼‑inch (6 mm) marine-grade aluminum alloy
Finish / Color: Matte metallic silver / brushed aluminum
Weight: ~26 lb (≈ 12 kg)
Mounting: Uses supplied brackets, hardware, and factory mounting points (no drilling)
Drain / Access ports: included for oil servicing
Reinforcements: Ribs stamped for stiffness and load distribution
Fasteners included: M10 bolts, flat washers, insert nuts etc.
Warranty: 1‑year limited
This skid plate is designed for ease of installation. The manufacturer estimates an install time of about 1 hour using only basic hand tools. Though some sources cite as little as 30 minutes, most users report that 45–60 minutes is typical for first-time installation. No cutting or drilling is required, and the process involves loosening a few brackets, sliding the plate into place, and torquing supplied bolts. The final assembly is straightforward even for a competent DIYer.
This skid plate fits 2015–2025 Ford F‑150 models equipped with EcoBoost (2.7L / 3.5L) or 5.0L V8 engines (automatic, 4WD). It does not fit PowerBoost hybrid variants. It also will not work with lift kits that include crossmember drop brackets.
If any questions arise about fitment, installation, or warranty details — or to report any inaccuracies in this description — please contact the MPT Performance experts at (407) 636‑7077 or by email.
MPT is proud to offer free shipping on most orders over $149.
Turnaround Times:
Special Considerations:
A Return Authorization Number is required for all returns. Please contact an MPT Expert to obtain an RA # before sending anything back to us for any reason.
MPT tuning charges and license fees are Non-Refundable. The sale is final when MPT has sent the tune file over email. This includes both new tune purchases and tune updates.
Products other than MPT tunes, digital products, and MPT decals may be returned within 30 days for any reason, provided that the product has not been installed and is in brand new, unused condition with the original packaging. Once a product has been installed it is non-refundable. We reserve the right to deny the return, should the product be received and it display signs of installation or unmentioned damage.
For vehicle programmers/tuners, the vehicle must be returned to stock if a program was installed. If a tuning device is returned and has not been returned to stock, a refund will not be issued, and your tuner will not be sent back without a shipping and handling fee.
The customer is responsible for all shipping charges incurred during the return process.
Amount Refunded:
•Returns post marked before 30 days from the date the item was received will be refunded the purchase price, minus a 25% restocking fee and the cost of shipping.
•After 30 days, all sales are Final.
•Shipping charges along with any package insurance are non-refundable. If your purchase was shipped with our Free Shipping option, the cost of the shipping will be subtracted from the total refund amount.
HP Tuners Credits are assigned to the HP Tuners product with the submitted serial number and cannot be transferred. Once you load a tune to your vehicle with the RTD, these credits are Non-Refundable.
Digital products and files that have no ability to be taken back physically, such as an SCT Tuner Unlock, are Non-Refundable.
nGauge Tune License Fee is included in your initial purchase of MPT tunes for the nGauge. This fee is factored into the price of the tunes and becomes Non-Refundable when the stock file has been emailed to MPT.
MPT Decals are Non-Refundable, once they have been received by the customer.
Thanks for subscribing!
This email has been registered!