




Protect your transfer case with this lightweight yet durable ¼" aluminum skid plate. Engineered for strength and corrosion resistance, it installs easily with no drilling required—perfect for serious off-road protection.
Top Features
¼" deep-stamped aluminum alloy
Reinforced crossmember for added strength
Matte metallic silver finish
Lightweight, rust-proof design (approx. 20 lbs)
No drilling or cutting required
Precision laser-cut for factory fitment
Drainage and vent slots for debris clearance
Vehicle Fitment
2024 Ford Ranger
2025 Ford Ranger
2024 Ford Ranger Raptor
2025 Ford Ranger Raptor
Physical products may be returned within 30 days for any reason, provided that the product has not been installed and is in brand new, unused condition with the original packaging. Once a product has been installed, it is non-refundable.
Digital Products, such as MPT Tunes and HP Tuners Credits, are not covered by this.
Please see our Refund Policy or contact an MPT Expert for more information.
MPT is proud to offer free shipping on most orders over $149.
Free Shipping applies only to the contiguous United States. Shipping and handling charges will apply to all orders outside the contiguous US, with the buyer being responsible for any duty fees or taxes their home country may charge to import goods.
With Free Shipping, we will choose the best shipping method for the order. We use all major carriers, including USPS, FedEx, UPS, and DHL.
Items not stocked at our location may incur additional lead-time or charges.
Please our Shipping Policy for more information.


Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986) is a California law that applies to all companies selling products in California. Proposition 65 requires warnings if a product contains any listed chemical present above very low levels that are known to cause cancer, birth defects or other reproductive harm. Proposition 65’s warning standards are among the most stringent in the world. Proposition 65 is not a product safety law, but rather a “right-to-know” law. Businesses are required to provide warnings to comply with Proposition 65. These warnings are required to be in place for all products offered for sale in California.
There are over 800 chemicals on the Proposition 65 list, which is administered by California's Office of Environmental Health Hazard Assessment (OEHHA), a part of the California Environmental Protection Agency. The list includes naturally occurring and man-made chemicals. Proposition 65 warnings can be seen for a wide variety of everyday consumer products, including Automotive Performance products, and warnings can be seen posted throughout California in a variety of establishments such as hotels, restaurants, automobile dealerships/repair shops, and retail stores just to name a few.
To comply with the requirements of Proposition 65, this warning is present on all products sold by MPT.
More detailed information can be found by going to:
https://www.p65warnings.ca.gov/
This aluminum transfer case skid plate is engineered to deliver top-tier underbody protection for the 2024–2025 Ford Ranger and Ranger Raptor models. Designed in Houston, TX, the unit is laser-cut and deep-stamped from ¼‑inch aluminum alloy, offering a balance of strength, light weight, and corrosion resistance. It replaces the thin factory steel cover and adds a reinforced crossmember support, helping shield the transfer case from rocks, logs, and trail debris. Because the aluminum substrate is inherently corrosion-resistant, even if the surface coating gets scratched or gouged, the core metal will not rust. Installation is straightforward and requires no drilling or cutting, using the existing frame mounting points.
Heavy-duty ¼‑inch deep-stamped aluminum alloy construction
Reinforced crossmember for additional structural support
Laser-cut design ensures precise fit and finish
Mounts to factory points with no drilling or modification
Drainage and vent slots to allow water and debris passage
Lightweight compared to aftermarket steel alternatives
Powder-coated or surface-finished to resist corrosion
Concealed fastener mounting to reduce snag risk off-road
Superior protection: Offers much stronger defense than the factory steel cover
Long-lasting performance: Aluminum resists rust even if coating is compromised
Weight savings: Adds minimal weight while offering substantial armor
Simplified maintenance: Service ports or apertures allow access without full removal
Easy installation: Uses factory mounting locations—no cutting or drilling
Compatibility: Designed specifically for 2024–2025 ranger/raptor platform
Peace of mind: Enhanced safety for drivetrain components on rough terrain
Warranty: Backed by manufacturer warranty (check specific terms for coverage)
Part Number: 2333.1887.3.6
Material: ¼‑inch (≈ 6 mm) deep-stamped aluminum alloy
Color / Finish: Matte metallic silver tone with corrosion-resistant coating
Weight: Approximately 20 lbs (≈ 9.1 kg)
Design Features: Reinforcing ribs, drainage/vent apertures, concealed fastener mounts
Compatibility: Designed for transfer case area in 2024–2025 Ranger and Ranger Raptor
Included Components: Skid plate, mounting brackets, hardware kit, installation instructions
The install is rated as relatively easy. According to the manufacturer’s documentation, the estimated installation time is about 1 hour. Because it uses existing mounting points and requires no drilling, a person with basic hand tools and moderate mechanical aptitude should complete the job without needing advanced fabrication skills. If any holes are tight, using a tap on included hardware and bracketry can help ease final assembly.
This skid plate is compatible with 2024–2025 Ford Ranger and 2024–2025 Ford Ranger Raptor models. It fits the transfer case region of 4WD (all-wheel-drive) or AWD configurations built on this platform. Confirm engine and drivetrain compatibility before purchase to ensure proper fit.
For technical questions or to report description inaccuracies, contact the MPT Performance experts at (407) 636‑7077 or by email.
MPT is proud to offer free shipping on most orders over $149.
Turnaround Times:
Special Considerations:
A Return Authorization Number is required for all returns. Please contact an MPT Expert to obtain an RA # before sending anything back to us for any reason.
MPT tuning charges and license fees are Non-Refundable. The sale is final when MPT has sent the tune file over email. This includes both new tune purchases and tune updates.
Products other than MPT tunes, digital products, and MPT decals may be returned within 30 days for any reason, provided that the product has not been installed and is in brand new, unused condition with the original packaging. Once a product has been installed it is non-refundable. We reserve the right to deny the return, should the product be received and it display signs of installation or unmentioned damage.
For vehicle programmers/tuners, the vehicle must be returned to stock if a program was installed. If a tuning device is returned and has not been returned to stock, a refund will not be issued, and your tuner will not be sent back without a shipping and handling fee.
The customer is responsible for all shipping charges incurred during the return process.
Amount Refunded:
•Returns post marked before 30 days from the date the item was received will be refunded the purchase price, minus a 25% restocking fee and the cost of shipping.
•After 30 days, all sales are Final.
•Shipping charges along with any package insurance are non-refundable. If your purchase was shipped with our Free Shipping option, the cost of the shipping will be subtracted from the total refund amount.
HP Tuners Credits are assigned to the HP Tuners product with the submitted serial number and cannot be transferred. Once you load a tune to your vehicle with the RTD, these credits are Non-Refundable.
Digital products and files that have no ability to be taken back physically, such as an SCT Tuner Unlock, are Non-Refundable.
nGauge Tune License Fee is included in your initial purchase of MPT tunes for the nGauge. This fee is factored into the price of the tunes and becomes Non-Refundable when the stock file has been emailed to MPT.
MPT Decals are Non-Refundable, once they have been received by the customer.
Thanks for subscribing!
This email has been registered!