18-26 Ford Expedition / 18-24 Lincoln Navigator Zone Offroad ZONF1224 2in Lift Kit

Zone Offroad 2-Inch Lift Kit for Ford Expedition | Part Number: ZONF1224

The Zone Offroad ZONF1224 2-Inch Lift Kit gives the 2018-2026 Ford Expedition & 2018-2024 Licoln Navigator a more aggressive stance with increased front ride height and a rear lift designed to help maintain a balanced appearance. Featuring a combination of top spacer and preload spacer at the front, this suspension lift is designed to provide the maximum amount of lift safely while helping prevent excessive extension of the factory upper ball joint and premature wear. A 1.25-inch rear top spacer complements the 2-inch front lift, while the included sensor brackets reposition the CCD sensors to accommodate the lift at the front and rear. For Expedition and Lincoln Navigator owners looking to enhance their SUV's appearance and accommodate select larger tire and wheel combinations, this Zone Offroad lift kit offers a practical suspension upgrade. Proper vehicle fitment must be verified before purchase, particularly for models equipped with ride height sensors on the front or rear control arms.

Key Features

• 2-inch front suspension lift designed to give the Ford Expedition and Lincoln Navigator a more aggressive appearance.
• 1.25-inch rear top spacer helps lift and level the rear in combination with the front lift.
• Combination front top spacer and preload spacer design helps prevent excessive extension of the factory upper ball joint.
• Designed to provide the maximum amount of lift safely while helping reduce the risk of premature factory upper ball joint wear.
• Includes the necessary sensor brackets to reposition CCD sensors for the front and rear suspension lift.
• Uses strut spacers for both the front and rear lift methods.
• Compatible tire and wheel combinations are specified for select 20-inch wheel setups, subject to vehicle clearance and potential trimming.
• Shocks are not included.

Benefits

• Enhanced styling: Adds a more aggressive, lifted stance to the Ford Expedition and Lincoln Navigator.
• Balanced appearance: The 1.25-inch rear spacer complements the 2-inch front lift to help maintain a level look.
• Factory component consideration: The combination spacer design is intended to help limit excessive extension of the factory upper ball joint.
• Sensor accommodation: Included brackets allow the CCD sensors to be repositioned for the front and rear lift installation.
• Larger tire options: Supports the listed tire and wheel combinations, subject to clearance requirements and possible trimming.
• Warranty information: Warranty coverage and terms are not specified in the supplied product information and should be confirmed with the seller before purchase.

Product Specifications

• Brand: Zone Offroad
• Part Number: ZONF1224
• Product Type: Suspension Lift Kit
• Front Lift Height: 2 inches
• Rear Lift Height: 1.25 inches
• Front Lift Method: Strut spacer with combination top spacer and preload spacer
• Rear Lift Method: Strut spacer
• Shocks Included: No
• CCD Sensor Brackets: Included
• Color: Not specified in the supplied product information
• Material: Not specified in the supplied product information
• Installation Time: 3-4 hours
• Installation Difficulty: Moderate
• Recommended Wheel Size: 20 x 9 inches
• Recommended Tire and Wheel Combination 1: 285/60 tires with 20 x 9-inch wheels and 5-inch backspacing
• Recommended Tire and Wheel Combination 2: 295/55 tires with 20 x 9-inch wheels and 5.75-inch backspacing
• Recommended Tire and Wheel Combination 3: 285/55 tires with 20 x 9-inch wheels and 5-inch backspacing
• Trimming Requirements: Trimming may be required for the recommended tire and wheel combinations.
• Running Board Clearance: Running boards must be removed to fit 295/55R20 tires on 20 x 9-inch wheels with 5.75-inch backspacing.

Benefits of the Recommended Tire and Wheel Combinations

The Zone Offroad ZONF1224 lift kit supports several specified tire and wheel combinations for owners seeking a more substantial SUV stance. Actual fitment depends on vehicle configuration and available clearance, and trimming may be necessary. For the 295/55R20 tire combination on 20 x 9-inch wheels with 5.75-inch backspacing, the running boards must be removed.

Install Difficulty Level

Installation Difficulty: Moderate. The estimated installation time is 3-4 hours, with 3 hours representing the shortest stated estimate. The spacer-based design provides a straightforward approach to raising the vehicle compared with replacing the complete suspension system. Installation should be performed by a qualified installer with the appropriate tools and procedures. The front coil spring remains under extreme pressure during strut disassembly, making the correct spring compressor essential.

Important Safety Warning: Always use a high-quality spring compressor and carefully read and follow the manufacturer's instructions. Improper coil spring removal or installation can result in serious injury or death.

Vehicle Fitment

• 2018 Ford Expedition — All submodels, 4WD, all fuel types listed.
• 2019 Ford Expedition — All submodels, 4WD, all fuel types listed.
• 2020 Ford Expedition — All submodels, 4WD, all fuel types listed.
• 2021 Ford Expedition — All submodels, 4WD, all fuel types listed.
• 2022 Ford Expedition — All submodels, 4WD, all fuel types listed.
• 2023 Ford Expedition — All submodels, 4WD, all fuel types listed.
• 2024 Ford Expedition — King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XLT, Platinum, SSV, Timberline, XL STX, and XLT. Most listed configurations specify 4WD; Timberline is listed with all drive types.
• 2025 Ford Expedition — All submodels, 4WD, all fuel types listed, with fitment data indicating 0-2 inches of front and rear lift.
• 2026 Ford Expedition — All submodels, 4WD, all fuel types listed, with fitment data indicating 0-2 inches of front and rear lift.
• 2018-2024 Lincoln Navigator— All submodels, 4WD, all fuel types

Engine Fitment: Specific engine sizes and engine codes are not identified in the supplied fitment information.

Important Fitment Exclusion: This kit will not fit 2025 and newer models equipped with ride height sensors on the front and/or rear control arms. Vehicle configuration and sensor location must be checked carefully before ordering.

Important Installation and Fitment Notes

• Running boards must be removed when installing 295/55R20 tires on 20 x 9-inch wheels with 5.75-inch backspacing.
• Trimming may be required for the recommended tire and wheel combinations.
• The coil spring is under extreme pressure during strut disassembly.
• Use only a high-quality spring compressor and follow the compressor manufacturer's instructions carefully.
  
• The kit is not compatible with 2025 and newer models equipped with ride height sensors on the front and/or rear control arms.
• Shocks are not included with this lift kit.

For questions about the Zone Offroad ZONF1224 2-Inch Lift Kit, vehicle compatibility, installation requirements, warranty coverage, or to report product description inaccuracies, contact the MPT Performance experts at (407) 636-7077 or by email.